Saturday, June 12, 2021

My DStv decoder is not scanning

What causes my DStv decoder is not scanning error?

My DStv decoder is not scanning error message is common, especially with new DStv installations or when you are using an older model decoder. It is easy to identify this problem thanks to the error message displayed on the TV. Your decoder will also indicate the specific light option. Once you spot these, you can begin fixing the problem.

My DStv decoder is not scanning

Reasons for this error message

The main cause for my DStv decoder is not scanning error message is a poor signal reception by your decoder. Often, the problem comes from your satellite dish or smart LNB. If they are installed incorrectly, you will get this error message. It is common in DIY dish installations where the right tools weren’t used.

Another cause for my DStv decoder is not scanning error message is poor weather. Your DStv signal will be affected greatly by the weather in your area. If it is raining or there is a storm, you will experience signal interruptions, and the decoder will refuse to scan. Most of the causes for my DStv decoder is not scanning error message can be corrected with simple DStv fixes.

How to fix my DStv decoder is not scanning error.

When you get this error message, the first thing to do is check the weather. If it is raining or there is a storm, it could be a cause of this error. First, wait for the weather to get better and see whether the problem persists. If it does, you can now check your satellite dish and smart LNB.

My DStv decoder is not scanning

Ensure your satellite dish is facing the right direction eastwards. It should also have the right angle of elevation to ensure it is getting a stronger signal. The satellite has a degree measurement to maintain while setting it up to ensure you don’t get my DStv decoder is not scanning error.

The smart LNB should also be connected firmly and all its cables connected to the right ports. If the smart LNB is damaged, you need to replace it with another one from an accredited installer. Following these processes will remove my DStv decoder, not scanning error messages, and you can begin watching again.

https://myofflinestash.com/dstv-decoder-stuck-on-scan-searching-for-signal

https://en.wikipedia.org/wiki/DStv

The post My DStv decoder is not scanning appeared first on Dstv Installer Johannesburg - 063 872 7325.



source https://imveloawards.co.za/my-dstv-decoder-is-not-scanning/

No comments:

Post a Comment

Paving Contractors in Pretoria: Expert Paver Contractors for Installation, Repairs and Sealing

Let us put you in touch with Trusted paving contractors in Pretoria for cheap installation, repairs and maintenance of paving Finding the ...