Dish Installations

Dish Installations process and cable connection

Before you can begin enjoying DStv programs, dish installations are the first and most important thing to do. This is where you mount the satellite dish in an appropriate position to receive signals better. You must do it correctly since it can affect your viewing experience. Your dish plays a huge role in the picture quality you get, and so it has to be great to work well.

An accredited DStv installer can do the dish installations, who is more experienced in making these connections. If you are an enthusiast, however, and like to engage in DIY projects, you can set up the satellite dish on your own. It will give you a great learning experience, and you will also save some money. However, the process is very technical, and if you are not keen enough, you can easily do it incorrectly.

What do you need for dish installations?

When making dish installations, you will need several specialized tools. These will help you in the connection’s different areas and ensure the process is as simple as possible. Some of these items will also come with your dish installations package, and you won’t need to buy them. Most of the tools you will need are your ordinary DIY and minor home repair tools.

First, you will need a cement drill to help you drill  into the walls where you intend to mount your satellite dish. You will also need a screwdriver for fitting in several screws for the dish, an electrician’s tape. Once you have these, you can proceed with the dish installations, and in no time, you will be enjoying all your favorite shows.

How to install a DStv dish

When you purchase your dish, it will come with all the vital parts of the connection. These include four steel screws, a long RG6 cable, a smart LNB, and a mount for the satellite. First, you will have to set up the mount before you can connect the dish to it. Since the dish is quite fragile and any interference could damage it, follow this process closely.

Identify the perfect location for your satellite mount and ensure any buildings or trees do not block it. It should also be facing eastwards for maximum signal reception. Using your cement drill, make four holes on the wall where the mount is to be attached. These should be deep enough to ensure the screw goes fully in for stability purposes.

Once you have dug these holes, you can now set up the satellite mount onto it. Ensure it is firmly in place to prevent it from getting disconnected by strong winds or tough weather. Once the mount is connected, you can now set up the satellite dish. In dish installations, you will also need to connect the smart LNB device to the satellite.

It is a small white device that comes with your dish, and it is the visible arm-like part of the satellite dish. The smart LNB helps to transform radio signals into ones your decoder can understand easily. It thus plays a huge role in your viewing experience and the picture quality you get. Setting it up only needs a few screws and a screwdriver, and the former is available on your DStv package.

Setting up cables for dish installations.

Once you are done setting up the satellite dish, you can connect all the needed cables. It is a simple process since the ports are well marked, and the cables are unique. This part of the dish installation process will take you a short time but should be done very carefully.

Connect one end of the RG6 cable to the smart LNB and connect the other end into the necessary port on your decoder. The end of the RG6 cable is quite fragile, and you should make these connections carefully. The cable should also run closer to or pinned to the wall to prevent it from wearing out faster.When you do this during dish installations, the connection will last longer and will work better.

Aligning your satellite dish correctly.

This process in dish installations happens after you have made all the connections and tested your signal strength. It helps you make any necessary corrections and realignments that will ensure your decoder is working properly. If the signal is good, you can skip this process, but you will have to realign the dish if it is bad.

Using your sat meter, measure the signal strength in all directions. Point your dish in the direction with the highest signal so that it gets proper reception. You can also use the tool to check for the elevation of your satellite dish. A DStv technician will advise you to place it between 36- and 39-degrees during dish installations for the best signal reception.

You will also need to adjust the smart LNB once you are done aligning your decoder. Test it consistently to ensure you are getting the strongest signal. It will ensure your decoder is receiving quality converted signals and that you have the best picture quality.

Checking for the stability of the satellite dish

The final process in dish installations is checking for the stability of your satellite dish. The satellite dish will be outside, and your installation should be strong enough to hold it in place. You can tag on it severally to check whether it will come off or reinforce it with more cement screws. The smart LNB should also be firmly attached to prevent it from falling off.

Dish installations are a technical yet easy-to-learn process, and you can choose to either get the services of a technician or do it on your own. in a short time, you will understand how everything in the connection works. When you encounter any need for repairs, you won’t need to call a technician since you can make the repairs.

https://www.wikihow.com/Install-a-Satellite-Dish

https://en.wikipedia.org/wiki/DStv

The post Dish Installations appeared first on Dstv Installer Johannesburg - 063 872 7325.

source https://imveloawards.co.za/dish-installations/